dayton-audio-ds90-pr-3-designer-series-passive-radiator

DS90-PR

Disponibilité: 1 en inventaire (livraisons différées disponibles)

Sku: DS90-PR

Soyez le premier à laisser un commentaire

Vue d'ensemble

Dayton Audio DS90-PR 3″ Designer Series Passive Radiator

PDF Fiche technique

1 en stock (peut être commandé)

Quantité

16.70$ CAD EACH

Catégories : Radiateurs Passifs
Product Specifications
Manufacturer DAYTON AUDIO
Speaker Type Passive Radiator
Nominal Diameter 92mm
Impedance – ohms
Power Handling (RMS) – W
Frequency Response – Hz
Sensitivity – dB
Voice Coil Diameter -mm

Dayton Audio DS90-PR 3″ Designer Series Passive Radiator

The Dayton Audio Designer Series passive radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, these passives match Dayton Audio’s Designer Series drives, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to portable battery powered speaker systems.

Specifications: • Fs: 42.4 Hz • Vas: 0.124 cu. ft. • Qms: 5.9 • Cms: 2.55 mm/N • Rms: 0.3 kg/s • Mms: 5.5 g • Sd: 31.2 sq. cm. • Xmax: 4 mm • Dimensions: Overall diameter: 3.63″, Cutout diameter: 2.76″, Depth: 0.86″.

Note: Adding mass to the passive radiator will decrease Fs and increase Qms.

Tip: As a general rule, the passive radiator(s) should have at least double the displacement of air (Vd) as the active woofer(s)/subwoofer(s) in the system.
To calculate Vd: Sd x Xmax = Vd

Informations complémentaires

Poids .12 kg
Dimensions 7 × 11 × 11 cm
Manufacturier

Nominal Diameter

Cone Material

Commentaires

Il n'y a pas encore de commentaires.

Seulement les clients connectés qui ont acheté ce produit peuvent laisser un commentaire.