Product Specifications | |
---|---|
Manufacturer | SOLEN |
Summary | The PCB-S circuit is a very sturdy fiberglass epoxy resin board, which is masked on both sides for higher protection. It uses a 6mm (.25") wide by 3 times thicker layer conductor trace made with 99.9% Oxygen Free Copper. All holes are pre drilled to accept a variety of sized components. Every PCB-S should be ordered with 3x 322GDS terminals & 9x TY5242MX tyraps. The inductors are side mount to save some space. The PCB-S design incorporates a 6db or 12db sloped low pass with an EQ & a 6db or 12db sloped high pass with L-pad. The PCB-S dimensions are 95mm (3.75") wide by 146mm (5.75") long by 1.5mm (1/16") |