APA102

Availability: Available on backorder

Sku: APA102

1 Review(s)
5 out of 5
Write review for this product
Quick Overview

The Dayton Audio APA102 is rated at 75 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output.

 PDF Technical Sheet

Available on backorder

Quantity

158.56$ CAD EACH

Categories : Amplifiers
Product Specifications
Manufacturer DATYON AUDIO
Summary Dayton Audio APA102 Class D Stereo 60 WPC Amplifier Auto On

The Dayton Audio APA102 high fidelity power amplifier switches sources and powers on (in auto-on mode) automatically when a source signal is detected. Two-sources, two-channels, and Class D topology make Dayton Audio’s APA102 amplifier the heavyweight in its class. The APA102 features two pairs of RCA line level inputs and a loop-out from the second source to feed additional zones, receivers, or other devices. Use the APA102 for additional power when connected to a multi-zone audio system, or by itself to power a stereo speaker system.

The APA102 is rated at 75 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 160 watts RMS into a single 8 ohm load when bridged. Each amplifier output channel incorporates robust protection circuitry for reliability and safety.

Specifications: • Output power: 60 watts RMS @ 8 ohms, 75 watts RMS @ 4 ohms, 160 watts RMS @ 8 ohms (minimum impedance) bridged mono • Total harmonic distortion: <1.0% @ 1 kHz • Signal to noise ratio: 100 dB, A-weighted • Frequency response: 10-30,000 Hz +0.0 dB/-3.0 dB • Input sensitivity: 700 mV • Power: 120 VAC, 60 Hz, 4.2A • Dimensions: 16.9″ W x 7.65″ D x 2.15″ H.

Additional Information

Weight 5.5 kg
Dimensions 12 x 50 x 26 cm
Manufacturer

DAYTON AUDIO

db(SPL)

100 – 110

Weight

2.5 – 5 kgs

1 review for APA102

  1. 5 out of 5
    5 out of 5

    :

    Connected these to my JBL bookshelf’s and cranked it for half an hour. Smooth as silk, hardly got warm. My Pioneer Elite receiver only has 9 amps and I want run 11 channels so I bought this to run 2 of the in ceiling speakers. Should be no problem.

Add a review

Top