Image result for as2 100

AS2.100 DSP Amplifier

Availability: 2 in stock (backorders allowed)

Sku: AS2.100

Be the first to review this product

Quick Overview

The AS2.100 is a plate amplifier for use in powered speaker systems. As an active speaker controller, a AS2.100 can form the basis of a powerful active two-way monitor. In stereo mode one AS2.100 will power an active master / passive slave pair.

 PDF Technical Sheet

2 in stock (also available on backorder)

Quantity

365.89$ CAD EACH

Categories : Amplifiers
Product Specifications
Manufacturer HYPEX ELECTRONICS
Summary Hypex AS2.100 DSP Amplifier

Stereo (passive filtered), Mono-2-way (DSP) or Bridged Mono

The module uses two UcD180LP OEM modules, which produce 180 W into 4 ohms. However, the supply limits total available power to 100 W / 140 W per channel, or 200/ 280 total power.

The AS2.100 is a plate amp for use in powered speaker systems. As an active speaker controller, a AS2.100 can form the basis of a powerful active two-way monitor. In stereo mode one AS2.100 will power an active master / passive slave pair. Finally, the module may also be used as a one-way 140W amplifier. All signal processing, including volume control, is done using the on-board DSP (digital signal processor).Figure 1 shows the block diagram of the amplifier. When two modules are used, the second unit slaves to the first unit (master) through a link cable. The link cable (a stereo mini jack cable) carries both the right audio channel and control data. This way, both units respond to the master control panel. A PC controls the AS2.100 through the USB port. This connection is used to upload the configuration and filter settings. An optional board permits use of the USB link for audio as well as an SPDIF link. In digital mode, master/slave linking is done through the SPDIF in/out connections instead of the mini jack cable.

Features:

115 Vac (not switchable to 220V)
Compact design
Personal Computer controlled
Dual UcD180 powered
Pop-free start and stop control
Stereo analogue input
Subwoofer output
Fully user customised filtering
Button panel controlled
Remote controlled
Link communication master / slave (with two modules only)
Low signal to noise (-100dB)

Applications:

Stereo passive filtered system
Briged mode for single subwoofer (max 140Watt into 4 Ohms)
Mono/mid 2-way setup (tweeter + sub)
2-way active filtered stereo system
2 channel system with active subwoofer
2 channel system, both modules in bridge mode for more power
Amplifier is not sealed, it requires a separate air volume from woofer

Remote control
The master unit is fitted with small keypad which can be placed in the front of the loudspeaker cabinet. Volume and idle/on is controlled by the pushbuttons and by an infra red remote control (not included). When 2 AS2.100 modules are used only one control panel is needed, cause the trigger communication between master and slave.

There is also a touch panel available at www.hypexshop.com. This can replace the standard control panel.

The use of an Infrared remote control adds the ability to switch input channels with the up and down buttons of the remote. The AS2.100 uses a standard RC-5 TV protocol for Infrared control.

Please download the manual for more information.

Version: AS2.100 115Vac (R1)

Note: Electronics are not shielded – DO NOT TOUCH BACK OF AMPLIFIER WHEN POWER IS CONNECTED!

Additional Information

Weight 1.8 kg
Dimensions 15 x 15 x 25 cm
Manufacturer

HYPEX ELECTRONICS

Impedance

10kohms

db(SPL)

100 – 110

Weight

0 – 2.5 kgs

Reviews

There are no reviews yet.

Be the first to review “AS2.100 DSP Amplifier”

Top