The highest quality speaker driver units that you can find.

UM15-22

2 left in stock
Dayton Audio UM15-22 15" Ultimax DVC Subwoofer 2 ohms Per Coil
CA$350.03Each
Product Specifications
Manufacturer DAYTON AUDIO
Speaker Type Glass Fiber Cone Subwoofer
Nominal Diameter 39cm
Impedance 2 + 2 ohms
Power Handling (RMS) 800 W
Frequency Response 20 - 500 Hz
Sensitivity 89.1 dB
Voice Coil Diameter 64mm

Dayton Audio UM15-22 15" Ultimax DVC Subwoofer 2 ohms Per Coil If you want outrageous amounts of bass, you gotta move some air The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass. The versatility you need for mobile, home, or pro subwoofer excellence Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility. Built to produce massive low frequency output and keep on doing it To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils. Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation. A strong motor takes you to wherever you want to be A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures. Cabinet recommendations: • Sealed 3.8 cubic ft. (net internal) with 3 lbs. of Acousta-Stuf polyfill, f3 of 34 Hz with a 0.83 Qtc alignment • Vented 4.5 cubic ft. (net internal, not including driver or port volume) with 6 lbs. of Acousta-Stuf for an f3 of 24 Hz. Larger cabinets and lower tuning frequencies are possible. Note: All parameters derived with voice coils wired in series.

FILENAME ACTION
um1522.pdf Download

Add a review

Be the first one to review this product.

Your review is submitted for approval.