MR16TX-8
4 left in stock
SB ACOUSTICS SATORI MR16TX-8, 165mm (6.5in / 6-1/2in) TEXTREME CONE NEODYMIUM MIDRANGE 8 OHM
CA$522.14Each
- MR16TX-8
- SB ACOUSTICS
SB ACOUSTICS SATORI MR16TX-8, 165mm (6.5in / 6-1/2in) TEXTREME CONE NEODYMIUM MIDRANGE 8 OHM
| Product Specifications | |
|---|---|
| Manufacturer | SB ACOUSTICS |
| Speaker Type | Textreme Cone Midrange |
| Nominal Diameter | 17cm |
| Impedance | 8 ohms |
| Power Handling (RMS) | 30 W |
| Frequency Response | 35 - 10000 Hz |
| Sensitivity | 89dB |
| Voice Coil Diameter | 36mm |
SB ACOUSTICS SATORI MR16TX-8, 17cm TEXTREME CONE NEODYMIUM MIDRANGE 8OHM
Features
- Advanced TeXtreme® cone
- Vented aerodynamic cast aluminum chassis
- Inverted soft low damping rubber surround
- Advanced BIMAX spider
- Powerful optimized low distortion neodymium motor system
- Extended copper sleeve on pole piece
- Non-conducting fiberglass voice coil former
- Vented pole piece and voice coil
- Light weight CCAW voice coil
- Long life silver lead wires
Specs
- Nominal Impedance 8 Ω
- DC resistance, Re 6.2 Ω
- Voice coil inductance, Le 0.11 mH
- Effective piston area, Sd 117 cm2
- Voice coil diameter 35.5 mm
- Voice coil height 10.7 mm
- Air gap height 5 mm
- Linear coil travel (p-p) 5.7 mm
- Magnetic flux density 1.17 T
- Magnet weight (NEO) 0.13 kg
- Net weight 1 kg
- Free air resonance, Fs 35 Hz
- Sensitivity (2.83 V / 1 m) 89 dB
- Mechanical Q-factor, Qms 6.47
- Electrical Q-factor, Qes 0.32
- Total Q-factor, Qts 0.31
- Moving mass incl. air, Mms 10.3 g
- Force factor, Bl 6.6 Tm
- Equivalent volume, VAS 38.9 liters
- Compliance, Cms 2.0 mm/N
- Mechanical loss, Rms 0.35 kg/s
- Rated power handling* 30 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
| FILENAME | ACTION |
|---|---|
| mr16tx8.pdf | Download |
Subscribe to Our Newsletter
Subscribe to our newsletter & get notification about discounts.