JOLLITY
- JOLLITY
- SEAS PRESTIGE
SEAS Prestige JOLLITY, 2 Way Loudspeaker Kit using the Coaxial L12RE/XFC.
A coaxial driver for compact loudspeakers with no compromises on sound quality. Designed at the SEAS R&D laboratory.
To meet the demand for loudspeaker components that will work in compact enclosures and still have a satisfying hi-fi quality sound, the SEAS R&D team has developed this new product. The L12RE/XFC is a coaxial driver with a mid-woofer using an aluminium cone, and a soft dome tweeter mounted inside the woofer voice coil. Built after SEAS' traditional high standards, the components are carefully inspected before the assembly in this compact, but still complicated product.
The recommended enclosure for this driver is a ported box. This will help limiting the excursion around the box tuning and extend the usable bandwidth. The internal volume is 2.5L and with a tuning at 63Hz. To keep the enclosure size at a minimum, the port is made like a shelf in the full width of the cabinet and exits to the front side to allow for placement close to a wall or in a bookshelf.
Looking at the measurements, we can see that this compact loudspeaker gives a nice and balanced response with good extension in the low end. The crossover ensures that the drivers sum in phase at the crossover frequency and that the roll-off slope is symmetric. Together this will make the loudspeaker act like a point source to create the sound illusion only a co\-axial or fullrange driver can deliver. All in all this serves a truly satisfying listening experience to the critical listener.
Crossover schematics:
Anechoic free field response at 1m 15° from tweeter axis 2.83V:
- Red is on-axis SPL.
- Blue is woofer SPL.
- Black is tweeter SPL.
- Green is on axis SPL with inverted tweeter polarity.
- Purple is the impedance.
| KIT CONTENT | |||||
| QT | PART # | ITEM | MANUFACTURER | ||
| 2 | L12RE/P08 | 12cm Aluminum Cone / 26mm Textile Dome Coaxial Driver | SEAS PRESTIGE | ||
| 2 | PA390 | 3.9 mfd 250v 17x28 | SOLEN | ||
| 2 | PA1000 | 10 mfd 250v 24x33 | SOLEN | ||
| 2 | B05A100K476 | 47 mfd 100v 16x34 | SOLEN | ||
| 2 | S20.33 | .33 mH 0.8 11x22x45 | SOLEN | ||
| 2 | L16.82 | .82 mH 1.2 16x32x64 Litz | SOLEN | ||
| 2 | MO1000J3R9 | 3.9 Ohms 10W | SOLEN | ||
| 2 | MO1000J6R8 | 6.8 Ohms 10W | SOLEN | ||
| 2 | MO1000J2R2 | 2.2 Ohms 10W | SOLEN | ||
| 6 | 322GDS | Crossover Terminal | SOLEN | ||
| 2 | PCB-S | PCB 2 Way Small Crossover Board | SOLEN | ||
| 14 | TY5242MX | Tie Wrap 3.6mm x 21cm | SOLEN | ||
| 2 | RPT17GAS | Round Terminal Cup, 50mm | SOLEN | ||
| 6 | CLASSIC1.6 | Tin Plated OFC 2x1.6mm | SUPRA CABLES | ||
| 4 | GFD110-1614B | Female Disconnect .110" 16/14 BLACK | SOLEN | ||
| 4 | GFD110-1614R | Female Disconnect .110" 16/14 RED | SOLEN | ||
| 2 | GFD205-1614B | Female Disconnect .205" 16/14 BLACK | SOLEN | ||
| 2 | GFD205-1614R | Female Disconnect .205" 16/14 RED | SOLEN | ||
| 12 | OXSOCKET8X1 | Hex Socket Screw #8x1" Black | SOLEN | ||
| 8 | 6X3/4P | Pan Screw #6x3/4" Black | SOLEN | ||
| 1 | POLYESTER | Fiberflex 12"x42"x1.5" | SOLEN | ||
| 32 | SCE41BSC | Self Adhesive Foam Tape Black (Gasket Material) | SOLEN | ||
NOTE:
The PCB-S is a generic board, that needs to be adjusted to be used with the Jollity crossover layout.
Jolity - PCB-S
L1 - L2
C1 - Ce
R1 - Re
C2 - C1
L2 - L1
C3 and R2 are connected in series of each other and positioned in the Rs of the PCB-S
R3 - Rp
| NOM DU FICHIER | ACTION |
|---|---|
| DIY_kit_SEAS_Jollity.pdf | Télécharger |