dayton-audio-ds135-8-5-designer-series-woofer-speaker

DS135-8

Disponibilité: 4 en inventaire (livraisons différées disponibles)

Sku: DS135-8

Soyez le premier à laisser un commentaire

Vue d'ensemble

Dayton Audio DS135-8 5″ Designer Series Woofer Speaker

PDF Fiche technique

4 en stock (peut être commandé)

Quantité

39.99$ CAD EACH

Product Specifications
Manufacturer DAYTON AUDIO
Speaker Type Paper Cone Midbass
Nominal Diameter 14cm
Impedance 8 ohms
Power Handling (RMS) 50 W
Frequency Response 50 – 7000 Hz
Sensitivity 86.9 dB
Voice Coil Diameter 25mm

Dayton Audio DS135-8 5″ Designer Series Woofer Speaker

The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.

These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.

• Suggested enclosures:

Sealed cabinet: Type: Acoustic suspension (alpha 3.0), Qtc 0.60; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9-1/8″H x 5-5/8″W x 3-1/2″D. Typical results: 3 dB down-point (f3): 118 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 50 Hz.

Vented cabinet: Type: Bass reflex; Size (internal) including volume displaced by driver and port: 0.17 ft³; Internal cabinet dimensions (golden ratio): 10-3/4″H x 6-5/8″W x 4-1/8″D; Port dimensions (with flared exit): 1″ dia. x 4″L. Typical results: 3 dB down-point (f3): 66 Hz; Tuning frequency (fb): 62 Hz; Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)): 48 Hz.

Informations complémentaires

Poids 1.632 kg
Dimensions 13 × 16 × 16 cm
Manufacturier

Nominal Diameter

Impédance

Puissance Nominale (RMS)

Cone Material

Commentaires

Il n'y a pas encore de commentaires.

Seulement les clients connectés qui ont acheté ce produit peuvent laisser un commentaire.