sb-acoustics-satori-mw16p-4-16cm-papyrus-cone-neodymium-woofer-4ohm

MW16P-4

Disponibilité: Disponible en livraison différée (backorder)

Sku: MW16P-4

Soyez le premier à laisser un commentaire

Vue d'ensemble

SB ACOUSTICS SATORI MW16P-4, 17cm PAPYRUS CONE NEODYMIUM WOOFER 4OHM

PDF Fiche technique

Disponible sur commande

Quantité

251.36$ CAD EACH

Product Specifications
Manufacturer SB ACOUSTICS
Speaker Type Papyrus Cone Woofer
Nominal Diameter 17cm
Impedance 4 ohms
Power Handling (RMS) 60 W
Frequency Response 28 Hz
Sensitivity 90.5 dB
Voice Coil Diameter 36mm

SB ACOUSTICS SATORI MW16P-4, 17cm PAPYRUS CONE NEODYMIUM WOOFER 4OHM

Features
Vented aerodynamic cast aluminium chassis for optimum strength and low compression
Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house
Soft low damping rubber surround for optimum transient response
Advanced BIMAX spider for improved linearity
Powerful optimized low distortion neodymium motor system
Non-conducting fibre glass voice coil former for minimum damping
Extended copper sleeve on pole piece for low inductance and reduced distortion
CCAW voice coil for reduced moving mass
Long life silver lead wires attached 180° apart for improved stability
Vented pole piece and coil former for reduced compression
High piston to chassis diameter ratio
Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Specs
Nominal Impedance 4 Ω
DC resistance, Re 3.4 Ω
Voice coil inductance, Le 0.15 mH
Effective piston area, Sd 119 cm2
Voice coil diameter 36 mm
Voice coil height 17 mm
Air gap height 5 mm
Linear coil travel (p-p) 12 mm
Magnetic flux density 1.17 T
Magnet weight 0.13 kg
Net weight 1.01 kg
Free air resonance, Fs 28 Hz
Sensitivity (2.83V/1m) 90.5 dB
Mechanical Q-factor, Qms 5.0
Electrical Q-factor, Qes 0.28
Total Q-factor, Qts 0.27
Moving mass incl. air,Mms 12.8 g
Force factor, Bl 5.2 Tm
Equivalent volume, Vas 50.2 liters
Compliance, Cms 2.5 mm/N
Mechanical loss, Rms 0.45 kg/s
Rated power handling* 60 W
* IEC 268-5, T/S parameters measured on drive units that are broken in

Informations complémentaires

Poids 1.56 kg
Dimensions 12 × 19 × 19 cm
Manufacturier

Nominal Diameter

Impédance

Puissance Nominale (RMS)

Cone Material

Commentaires

Il n'y a pas encore de commentaires.

Seulement les clients connectés qui ont acheté ce produit peuvent laisser un commentaire.