dayton-audio-ds115-pr-4-designer-series-passive-radiator

DS115-PR

Disponibilité: 4 en inventaire (livraisons différées disponibles)

Sku: DS115-PR

Soyez le premier à laisser un commentaire

Vue d'ensemble

Dayton Audio DS115-PR 4″ Designer Series Passive Radiator

PDF Fiche technique

4 en stock (peut être commandé)

Quantité

18.85$ CAD EACH

Catégories : Radiateurs Passifs
Product Specifications
Manufacturer DAYTON AUDIO
Speaker Type Passive Radiator
Nominal Diameter 12cm
Impedance – ohms
Power Handling (RMS) – W
Frequency Response – Hz
Sensitivity – dB
Voice Coil Diameter -mm

Dayton Audio DS115-PR 4″ Designer Series Passive Radiator

The Dayton Audio Designer Series passive radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, these passives match Dayton Audio’s Designer Series drives, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from bookshelf two-ways to portable battery powered speaker systems.

Specifications: • Fs: 29.3 Hz • Vas: 0.33 cu. ft. • Qms: 3.66 • Cms: 2.27 mm/N • Rms: 0.7 kg/s • Mms: 13 g • Sd: 54.1 sq. cm. • Xmax: 6 mm • Dimensions: Overall diameter: 4.55″, Cutout diameter: 3.69″, Depth: 1.17″.

Note: Adding mass to the passive radiator will decrease Fs and increase Qms.

Tip: As a general rule, the passive radiator(s) should have at least double the displacement of air (Vd) as the active woofer(s)/subwoofer(s) in the system.
To calculate Vd: Sd x Xmax = Vd

Informations complémentaires

Poids .216 kg
Dimensions 8 × 14 × 14 cm
Manufacturier

Nominal Diameter

Cone Material

Commentaires

Il n'y a pas encore de commentaires.

Seulement les clients connectés qui ont acheté ce produit peuvent laisser un commentaire.