dayton-audio-ds270-pr-10-designer-series-passive-radiator

DS270-PR

Disponibilité: 2 en inventaire (livraisons différées disponibles)

Sku: DS270-PR

Soyez le premier à laisser un commentaire

Vue d'ensemble

Dayton Audio DS270-PR 10″ Designer Series Passive Radiator

PDF Fiche technique

2 en stock (peut être commandé)

Quantité

40.29$ CAD EACH

Catégories : Radiateurs Passifs
Product Specifications
Manufacturer DAYTON AUDIO
Speaker Type Passive Radiator
Nominal Diameter 27cm
Impedance – ohms
Power Handling (RMS) – W
Frequency Response – Hz
Sensitivity – dB
Voice Coil Diameter -mm

Dayton Audio DS270-PR 10″ Designer Series Passive Radiator

The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Shielded DVC line of subwoofers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems.

Specifications: • Fs: 21.9 Hz • Vas: 3.73 cu. ft. • Qms: 3.98 • Cms: 0.60 mm/N • Rms: 3.1 kg/ • Mms: 88.4 g • Sd: 353 sq. cm. • Xmax: 11 mm • Dimensions: Overall diameter: 10.63″, Cutout diameter: 8.94″, Depth: 2.81″.

Note: Adding mass to the passive radiator will decrease Fs and increase Qms.

Tip: As a general rule the passive radiator(s) should be able to move double the volume of air as the active woofer(s)/subwoofer(s) in the system. For example: A passive radiator system for a 10″ woofer/subwoofer that has 10mm of X-max would require 2-10″ passive radiators with 10mm of X-max. For single passive radiator systems, it is common to use a passive that is larger than the active woofer(s)/subwoofer(s).

Informations complémentaires

Poids .9 kg
Dimensions 14 × 30 × 30 cm
Manufacturier

Nominal Diameter

Cone Material

Commentaires

Il n'y a pas encore de commentaires.

Seulement les clients connectés qui ont acheté ce produit peuvent laisser un commentaire.