MT19CP-8
- MT19CP-8
- SB ACOUSTICS
SB Acoustics Satori MT19CP-8. 187mm (7.5in / 7-1/2in) Papyrus Cone / 26mm (1in) Textile Dome Coax, 8 ohm.
| Product Specifications | |
|---|---|
| Manufacturer | SB ACOUSTICS SATORI |
| Speaker Type | Payrus Cone / Textile Dome Coax |
| Nominal Diameter | 19cm/25mm |
| Impedance | 8 ohms |
| Power Handling (RMS) | 60 W |
| Frequency Response | 43 - 20000Hz |
| Sensitivity | 90 dB |
| Voice Coil Diameter | 39/25mm |
SB Acoustics Satori MT19CP-8, 19cm Papyrus Cone Coax, 8ohm.
Features
Vented cast aluminium chassis
Proprietary cone material with EGYPTIAN PAPYRUS made in house
Powerful low distortion neodymium motor system with extended copper sleeve
Low profile surround for minimum high frequency diffraction
Light weight CCAW voice coil on fibre glass former
Long life silver lead wires
Soft dome tweeter with neodymium motor, copper cap and CCAW voice coil
Specs
SPECS WOOFER:
Nominal Impedance 8 Ω
DC resistance, Re 6.5 Ω
Voice coil inductance, Le 0.12 mH
Effective piston area, Sd 152 cm2
Voice coil diameter 38.6 mm
Voice coil height 13.2 mm
Air gap height 6 mm
Linear coil travel (p-p) 7.2 mm
Magnetic flux density 1.1 T
Magnet weight 0.16 kg
Net weight 1.56 kg
Free air resonance, Fs 43 Hz
Sensitivity (2.83V/1m) 90 dB
Mechanical Q-factor, Qms 6.54
Electrical Q-factor, Qes 0.33
Total Q-factor, Qts 0.31
Moving mass incl. air,Mms 12.1 g
Force factor, Bl 8.05 Tm
Equivalent volume, Vas 37.1 liters
Compliance, Cms 1.13 mm/N
Mechanical loss, Rms 0.5 kg/s
Rated power handling* 60 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
SPECS TWEETER:
Nominal Impedance 4 Ω
DC resistance, Re 3.7 Ω
Voice coil diameter 25.4 mm
Voice coil height 1.3 mm
Air gap height 2.5 mm
Free air resonance, Fs 1200 Hz
Sensitivity (2.83V/1m) 90 dB
Rated power handling* 60 W
Magnetic flux density 1.2 T
Magnet weight 0.016 kg
Net weight 0.083 kg
| NOM DU FICHIER | ACTION |
|---|---|
| mt19cp8.pdf | Télécharger |
| Satori-MT19CP8-Coax-Crossover.pdf | Télécharger |