2 Way Sealed Monitor, 1x KE25SC and 1x B200 #5882. Special Ordered Item, Not Actually in Stock.
As the most compact member of the La Belle family, the La Belle CR is equipped with the same tweeter and mid-range drivers as its bigger sisters La Belle and La Belle Center, but does without the woofers found in those larger arrangements. As regards its appearance, the La Belle CR is obviously based on the La Belle. The objective of the development was to produce rear speaker that can also be used as a smaller centre speaker.
In order to achieve a reasonable lower limiting frequency for use with a surround system, the cabinet was designed to be just big enough to house the B 200 - 6 Ohm above 67 Hz while keeping the loudspeaker cabinet as compact as possible. Although this may appear to be a contradiction in terms, the parameters of the B 200 - 6 Ohm allow this idea to be put into practice, which enables the La Belle CR to be easily integrated in a surround system in conjunction with large main speakers and subwoofers. Even if used as a simple pair of stereo speakers, they will cut a good figure.
The low-frequency range is subjected to linearising and high-pass filtering by the serial capacitor. Nevertheless, we recommend including a high-pass filter on the surround amp (small mode), which will enable much improved bass management. Since it does not have to cope with the lower frequencies, the La Belle CR is well able to keep up with the larger family members at the top end of the volume scale.
At the same time, it has been possible to retain the inimitable soundquality and range of detail found throughout the La Belle family, which allows the harmonious surround effect to be achieved through all the speakers at the highest level. The challenge of reproducing the finest acoustic details provided by the source of the sound at the volume levels typically encountered in film environments is met with remarkable accuracy, which results in many an astonished listener in the auditorium. This speaker is quite simply able to amaze.
KIT CONTENT
QT
PART #
ITEM
MANUFACTURER
1
LABELLE CR
Louds. Kit La Belle CR #5882 Germany
VISATON
Assembly
Once the front panel has been shaped with all the necessary bevels, openings and milled shapes, and the terminal port has been completed at the rear, the base, lid, sides and rear wall are glued together.
The front panel is positioned from the front.
Inner damping
One mat is used to cover the entire rear wall, the second is folded down the middle and positioned behind the tweeter with the fold pointing towards the lid. This means there are three layers of damping materialbehind the tweeter and one behind the B 200 - 6 Ohm.
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.
Tweeter
KE 25 SC - 8 Ohm
1 pc.
Waveguide
WG 220x150
1 pc.
Bass Midrange
B 200 - 6 Ohm
1 pc.
Crossover
LA BELLE CR
1 pc.
Terminal
BT 95/75
1 pc.
Dampingmaterial
Polyesterwool
1 bag
Cylinder head screws
5 x 30 mm
6 pcs.
Round head screws
4 x 20 mm
4 pcs.
Countersunk screws
3.5 x 25 mm
10 pcs.
Cable
2 x 2.5 mm²
1.5 m
Soyez le premier à donner votre avis sur ce produit.
Votre avis est soumis pour approbation.
Abonnez-vous à notre infolettre
Abonnez-vous à notre infolettre et recevez une notification sur les remises.
Nous utilisons des cookies pour vous offrir la meilleure expérience de navigation sur notre site.
Politique de confidentialité.
