The highest quality speaker driver units that you can find.
Favorites
ALL CATEGORIES
Product image
product-additional-image
Product image
Product image

DAEX-9-4SM

8 left in stock
Dayton Audio DAEX-9-4SM, 9mm (0.375in / 3/8in) Skinny Mini Exciter Audio and Haptic Feedback 0.5W 4 Ohm
CA$8.46Each

Dayton Audio DAEX-9-4SM, 9mm (0.375in / 3/8in) Skinny Mini Exciter Audio and Haptic Feedback 0.5W 4 Ohm

Product Specifications
Manufacturer DAYTON AUDIO
Type  Skinny Mini Exciter DAY Taiwan
Impedance 4 ohms
Power Handling (RMS) 0.5 W
Frequency Response - Hz
Sensitivity - dB
 
Dayton Audio DAEX-9-4SM Skinny Mini Exciter Audio and Haptic Feedback 9mm 0.5W 4 Ohm Dayton Audio's DAEX-9-4SM Skinny Mini exciter will allow you to add audio or haptic (tactile) feedback to even the smallest projects. The 9 mm Skinny Mini exciter is an ideal option when designing pocket sized personal speakers or for adding audio to small art projects and models. At only 0.5" wide by 1" long, this exciter is even perfect for use in virtual reality haptic feedback systems such as gloves and headsets. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The unique suspension is capable of high physical excursion to allow this extremely small and lightweight exciter to deliver an impressive amount of force while remaining linear. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials will be slightly quieter but result in a more full-range sound. Specifications: • Power handling: 1 watt RMS • VCdia: 9 mm • Nominal impedance: 4 ohms • Re: 3.6 ohms • Le: 0.013 mH • Fs: 1,200 Hz • Dimensions: 0.51" (13 mm) W x 1.05" (26.5 mm) L x 0.22" (5.75 mm) H • Adhesive dimensions: 0.46" (11.75 mm) outside diameter • Weight: 2.3 grams.
FILENAME ACTION
daex94sm.pdf Download

Add a review

Be the first one to review this product.

Your review is submitted for approval.
The website uses cookies to ensure you get the best experience on our website. Privacy Policy.