MW16P-12
Out of stock
SB ACOUSTICS SATORI MW16P-12, 165mm (6.5in / 6-1/2in) PAPYRUS CONE NEODYMIUM WOOFER 12 OHM
CA$270.68Each
- MW16P-12
- SB ACOUSTICS
SB ACOUSTICS SATORI MW16P-12, 165mm (6.5in / 6-1/2in) PAPYRUS CONE NEODYMIUM WOOFER 12 OHM
| Product Specifications | |
|---|---|
| Manufacturer | SB ACOUSTICS |
| Speaker Type | Papyrus Cone Neodymium Woofer |
| Nominal Diameter | 17cm |
| Impedance | 12 ohms |
| Power Handling (RMS) | 60 W |
| Frequency Response | Hz |
| Sensitivity | dB |
| Voice Coil Diameter | 36mm |
SB ACOUSTICS SATORI MW16P-12, 17cm PAPYRUS CONE NEODYMIUM WOOFER BLACK 12OHM Features
Features
- Vented aerodynamic cast aluminium chassis for optimum strength and low compression
- Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house
- Soft low damping rubber surround for optimum transient response
- Advanced BIMAX spider for improved linearity
- Powerful optimized low distortion neodymium motor system
- Non-conducting fibre glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and reduced distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires attached 180° apart for improved stability
- Vented pole piece and coil former for reduced compression
- Low piston to chassis diameter ratio
- Gasket and bolt hole protrusions for reduced coupling to speaker cabinet
Specs
- Nominal Impedance 12 Ω
- DC resistance, Re 10.0 Ω
- Voice coil inductance, Le 0.19 mH
- Effective piston area, Sd 119 cm2
- Voice coil diameter 35.5 mm
- Voice coil height 17.35 mm
- Air gap height 5 mm
- Linear coil travel (p-p) 12.4 mm
- Magnetic flux density 1.17 T
- Magnet weight 0.13 kg
- Net weight 1.01 kg
- Free air resonance, Fs 30.6 Hz
- Sensitivity (2.83V/1m) 85 dB
- Mechanical Q-factor, Qms 4.81
- Electrical Q-factor, Qes 0.40
- Total Q-factor, Qts 0.37
- Moving mass incl. air,Mms 11.5 g
- Force factor, Bl 7.4 Tm
- Equivalent volume, Vas 47.3 liters
- Compliance, Cms 2.35 mm/N
- Mechanical loss, Rms 0.46 kg/s
- Rated power handling* 50 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
| FILENAME | ACTION |
|---|---|
| mw16p12.pdf | Download |
Subscribe to Our Newsletter
Subscribe to our newsletter & get notification about discounts.