-
Accessories
-
Capacitors
- Solen Fast Caps 250v Polypropylene
- Solen Fast Caps 400v Polypropylene
- Solen Fast Caps 630v + Polypropylene
- Solen Silver Caps 700v Polypropylene
- Solen Film/Foil Polypropylene Caps
- Solen Teflon Metallized Caps 1300v
- Solen Film/Foil Teflon Caps 1000v
- Solen Polyester Caps 160v
- Solen Non-Polarized Electrolytic Caps 100v
- Solen Polarized Electrolytic Axial Caps 500v
- Dayton Polypropylene Caps
- Dayton Film/Foil Caps
- Elna RFS Silmic II 50v Polarized Electrolytic Caps
- Elna ROA Cerafine 100v Polarized Electrolytic Caps
- Elna LPO 63-100v Polarized Electrolytic Caps
- Nichicon UFG Muse 50v, 100v Polarized Electrolytic Caps
- UCC EX 63v Polarized Electrolytic Caps
- UCC ESMH 63-100v Polarized Electrolytic Caps
- UCC KMQ 450v Polarized Electrolytic Caps
- Capacitor Brackets
-
Inductors
- Litz Inductors 16AWG (1.21mm)
- Litz Inductors 14AWG (1.53mm)
- Litz Inductors 12AWG (1.93mm)
- Litz Inductors 10AWG (2.40mm)
- Litz Inductors 8AWG (3.10mm)
- Std. Inductors 20AWG (0.80mm)
- Std. Inductors 18AWG (1.02mm)
- Std. Inductors 16AWG (1.29mm)
- Std. Inductors 14AWG (1.63mm)
- Std. Inductors 12AWG (2.05mm)
- Std. Inductors 10AWG (2.59mm)
- Resistors
-
Speaker Drivers
- Speaker Kits
- Speaker Cabinets
- Crossover & PCB
- Crossover Kits
-
Tubes & Accessories
- Audio Measuring Tools
- Cables
- Home Audio & Video
- Headphones
- Car audio
- Design Softwares
- Books and Clothing
- From the Attic
SP22R
- SP22R
- SEAS PRESTIGE
Seas Prestige SP22R, 220mm (8in) Polypropylene Cone Passive Radiator, for CA22RNX, CD22RN4X and CD22RN4X, H9945.
| Product Specifications | |
|---|---|
| Manufacturer | SEAS PRESTIGE |
| Speaker Type | Polypropylene Cone Passive Radiator |
| Nominal Diameter | 22cm |
| Impedance | - ohms |
| Power Handling (RMS) | - W |
| Frequency Response | - Hz |
| Sensitivity | - dB |
| Voice Coil Diameter | 20mm |
SP22R is a passive radiator intended for use as an alternative to the port in a bass reflex cabinet, together with an active woofer of similar size or smaller.
In many applications, the traditional bass reflex port may produce high speed air noise or even have poor effect due to a small port area or a large port length. In such cases, a passive radiator may bring about an improvement.
The chart below will show you the mass which has to be added to the cone of the passive radiator in order to obtain the desired Helmholtz resonance frequency in a given cabinet volume.
The passive radiator cone is equipped with an M4mm screw to which you can easily attach the added mass.
For optimum performance, the passive radiator should be mounted vertically (with horizontal cone axis). This is especially important when a significant additional mass is used.
| FILENAME | ACTION |
|---|---|
| sp22r.pdf | Download |