-
Accessories
-
Capacitors
- Solen Fast Caps 250v Polypropylene
- Solen Fast Caps 400v Polypropylene
- Solen Fast Caps 630v + Polypropylene
- Solen Silver Caps 700v Polypropylene
- Solen Film/Foil Polypropylene Caps
- Solen Teflon Metallized Caps 1300v
- Solen Film/Foil Teflon Caps 1000v
- Solen Polyester Caps 160v
- Solen Non-Polarized Electrolytic Caps 100v
- Solen Polarized Electrolytic Axial Caps 500v
- Dayton Polypropylene Caps
- Dayton Film/Foil Caps
- Elna RFS Silmic II 50v Polarized Electrolytic Caps
- Elna ROA Cerafine 100v Polarized Electrolytic Caps
- Elna LPO 63-100v Polarized Electrolytic Caps
- Nichicon UFG Muse 50v, 100v Polarized Electrolytic Caps
- UCC EX 63v Polarized Electrolytic Caps
- UCC ESMH 63-100v Polarized Electrolytic Caps
- UCC KMQ 450v Polarized Electrolytic Caps
- Capacitor Brackets
-
Inductors
- Litz Inductors 16AWG (1.21mm)
- Litz Inductors 14AWG (1.53mm)
- Litz Inductors 12AWG (1.93mm)
- Litz Inductors 10AWG (2.40mm)
- Litz Inductors 8AWG (3.10mm)
- Std. Inductors 20AWG (0.80mm)
- Std. Inductors 18AWG (1.02mm)
- Std. Inductors 16AWG (1.29mm)
- Std. Inductors 14AWG (1.63mm)
- Std. Inductors 12AWG (2.05mm)
- Std. Inductors 10AWG (2.59mm)
- Resistors
-
Speaker Drivers
- Speaker Kits
- Speaker Cabinets
- Crossover & PCB
- Crossover Kits
-
Tubes & Accessories
- Audio Measuring Tools
- Cables
- Home Audio & Video
- Headphones
- Car audio
- Design Softwares
- Books and Clothing
- From the Attic
T18REXXFC
- T18REXXFC
- SEAS PRESTIGE
Seas Prestige T18REXXFC, 176mm (7in) TPX Cone Coax, with 39mm Voice Coil and 26mm Textile Dome Neodymium Tweeter, H1353, 8ohm.
| Product Specifications | |
|---|---|
| Manufacturer | SEAS PRESTIGE |
| Speaker Type | TPX Cone Coax |
| Nominal Diameter | 18cm |
| Impedance | 8 ohms |
| Power Handling (RMS) | 200 W |
| Frequency Response | 30 - 25000 Hz |
| Sensitivity | 87.5 dB |
| Voice Coil Diameter | 39mm |
The PP/TPX based cone matches ideally with the adaptive rubber surround.
The result is an outstandingly smooth frequency response from the mid woofer.
The coaxially arranged precoated fabric dome high frequency unit has a low resonance frequency, and integrates with the cone driver to a point source.
The cone of the woofer acts as a horn loading for the tweeter, and the chassis of the dome unit represents the throat of this horn.
Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment.
Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
| FILENAME | ACTION |
|---|---|
| t18rexxfc.pdf | Download |