ALL CATEGORIES
-
Accessories
-
Capacitors
- Solen Fast Caps 250v Polypropylene
- Solen Fast Caps 400v Polypropylene
- Solen Fast Caps 630v + Polypropylene
- Solen Silver Caps 700v Polypropylene
- Solen Film/Foil Polypropylene Caps
- Solen Teflon Metallized Caps 1300v
- Solen Film/Foil Teflon Caps 1000v
- Solen Polyester Caps 160v
- Solen Non-Polarized Electrolytic Caps 100v
- Solen Polarized Electrolytic Axial Caps 500v
- Dayton Polypropylene Caps
- Dayton Film/Foil Caps
- Elna RFS Silmic II 50v Polarized Electrolytic Caps
- Elna ROA Cerafine 100v Polarized Electrolytic Caps
- Elna LPO 63-100v Polarized Electrolytic Caps
- Nichicon UFG Muse 50v, 100v Polarized Electrolytic Caps
- UCC EX 63v Polarized Electrolytic Caps
- UCC ESMH 63-100v Polarized Electrolytic Caps
- UCC KMQ 450v Polarized Electrolytic Caps
- Capacitor Brackets
-
Inductors
- Litz Inductors 16AWG (1.21mm)
- Litz Inductors 14AWG (1.53mm)
- Litz Inductors 12AWG (1.93mm)
- Litz Inductors 10AWG (2.40mm)
- Litz Inductors 8AWG (3.10mm)
- Std. Inductors 20AWG (0.80mm)
- Std. Inductors 18AWG (1.02mm)
- Std. Inductors 16AWG (1.29mm)
- Std. Inductors 14AWG (1.63mm)
- Std. Inductors 12AWG (2.05mm)
- Std. Inductors 10AWG (2.59mm)
- Resistors
-
Speaker Drivers
- Speaker Kits
- Speaker Cabinets
- Crossover & PCB
- Crossover Kits
-
Tubes & Accessories
- Audio Measuring Tools
- Cables
- Home Audio & Video
- Headphones
- Car audio
- Design Softwares
- Books and Clothing
- From the Attic
BSX130WP
4 left in stock
Visaton BSX130WP, 153mm (5.5in / 5-1/2in) Structure Sound Converter, with 50mm Voice Coil, Splash Water Protected, #4515, 4ohm.
CA$123.89Each
- BSX130WP
- VISATON
Visaton BSX130WP, 153mm (5.5in / 5-1/2in) Structure Sound Converter, with 50mm Voice Coil, Splash Water Protected, #4515, 4ohm.
| Product Specifications | |
|---|---|
| Manufacturer | VISATON |
| Type | Structure Sound Converter Splash Water Protected Bass Shaker |
| Impedance | 4 ohms |
| Power Handling (RMS) | 50 W |
| Frequency Response | - Hz |
| Sensitivity | - dB |
Structure-borne sound converter for bass frequencies. The units are attached to a surface which is able to resonate, which causes it to oscillate (e.g. a panel of a car body, the base construction of a settee etc.). No enclosed cabinet is required. Using the BSX 130 WP - 4 Ohm, this enables the lowest bass frequencies, such as those used for effects in films, to be reproduced in such a way that they are felt through the body rather than heard.
64 IP
Attributes
- Splash water protected
Be the first one to review this product.
Subscribe to Our Newsletter
Subscribe to our newsletter & get notification about discounts.
The website uses cookies to ensure you get the best experience on our website.
Privacy Policy.