New
hypex_fusionamp_FA123_2x125w_100w_amplifer_dsp

FA123

Availability: In stock

Sku: FA123

Be the first to review this product

Quick Overview

Hypex, FusionAmp FA123, 2x 125 Wrms + 100 Wrms Ncore Amplifier Module with DSP.

 PDF Technical Sheet
Quantity

555.03$ CAD EACH

Categories : Amplifiers, DSP

 

Product Specifications
Manufacturer HYPEX ELECTRONICS
Summary Hypex FusionAmp FA123 2x125W + 100W Tweeter

The FusionAmp is our new plate amplifier range, powered by our new mains powered NCORE modules. There are one, two and three way systems available, each with balanced and unbalanced analog inputs. The one-way models also have a high level analog input. The multi-way models have a digital input instead.

This FusionAmp can be the basis of e.g. a powerful two- or three-way monitor. The FA123 has two 125 Wrms Ncore® amplifiers which can also be bridged to form one powerful 250 Wrms amplifier. Additionaly, a 100 Wrms Ncore® tweeter channel is added.

The FusionAmp is designed to be mounted in vertical or horizontal position. The FusionAmp may be tilted 45° in both direction as depicted. Vent holes should not be covered and free convection should not be impeded.

To protect your valuable drivers, the DSP does not contain a filter out of the box. A filter needs to be configured and uploaded using Hypex Filter design (HFD) software before the FusionAmp will produce an output signal. Please refer to the online HFD manual for more information. Since the FusionAmp’s DSP does not contain a filter by default, you need to get started with HFD. This free software can be downloaded from the Hypex website. You can start getting acquainted with the software, even without a Hypex product connected. An elaborate guide on how to design the filters can be found on the Hypex website.

The Fusion Amp must be mounted into the speaker cabinet with 8 or 10 screws, not included. Hypex recommends Phillips head screws, 4.3 x 25.4 mm.

Fusion-Amps can also be operated with remote control for volume control and source selection. Our well known Hypex Remote Control can be used for this. To use a remote, you will need the new IR-receiver kit, also available as a separate module via the pull-down menu.

Specs

Mains voltage input 100-120Vac / 200-240Vac ±10%
Power (4Ω) 2x 125Wrms + 1x 100Wrms
Channels 1 channel / 3 way
Dimensions mm 360*120*55mm
Weight 955gr

Dimensions: 360 * 120 x 55 mm

Weight: 955 gram

At the moment, a preliminary user guide is available. Further documentation will be available soon.

Connections

 

  • Analogue balanced XLR in and through
  • Analogue unbalanced RCA input
  • Digital AES in and through
  • Digital S/PDIF in and through
  • Digital Optical TosLink input
  • USB 2.0 configuration interface

Features

 

  • 15 biquads per amplifier
  • Three selectable presets for filters
  • Source selection
  • Signal detect
  • Auto shutdown
  • BTL capable
  • Clip protect
  • Thermal protect
  • Filter protection

What is included in the box:

  • The FA123
  • A printed copy of the user guide
  • Speaker connection cables

Additional information

Weight 1.2 kg
Dimensions 12 x 20 x 38 cm
Manufacturer

Reviews

There are no reviews yet.

Be the first to review “FA123”

Top