TPS3116D2-Class-D-2.1-Bluetooth-5.0-Amplifier-Board-2-x-50W-100W-with-Filter-and-Volume-Co

TPS3116D2

Availability: 5 in stock (backorders allowed)

Sku: TPS3116D2

Be the first to review this product

Quick Overview

TPS3116D2 Class D 2.1 Bluetooth 5.0 Amplifier Board 2 x 50W + 100W with Filter and Volume Controls

5 in stock (can be backordered)

Quantity

70.16$ CAD EACH

Product Specifications
Manufacturer DAYTON AUDIO
Summary TPS3116D2 Class D 2.1 Bluetooth 5.0 Amplifier Board 2 x 50W + 100W with Filter and Volume Controls

Make your own 2.1 multimedia wireless Bluetooth amplifier or portable speaker with this 2 x 50W + 100W amplifier board. The board accepts 12 VDC to 24 VDC which makes it perfect for making home or mobile audio projects. Make your audio project truly portable by adding three to five 18650 Li-Ion batteries.
These boards are pre-tested and pre-assembled, which makes your project easy to complete. The on-board jacks, potentiometer, and screw terminals let you get this board powered up and playing music in minutes. Just connect your power source using a 2.1 x 5.5 mm DC power plug, a 3.5 mm stereo audio source, and run speaker wire from the six screw terminals to you speakers and you’re done. For the most wattage output use 120-055 24 VDC power adapter. If you don’t want to use the 3.5 mm jack, an optional 3-pin connector for internal line-in audio is available (wiring harnesses not included). Push and hold in the master volume control for three seconds to switch from Bluetooth to line-in source. Push in master volume control to switch back to Bluetooth. Use the built-in 150 Hz high pass filter switch on the board to protect your satellite speakers.

Specifications: • Power output: 2 x 50W + 1 x 100W @ 4 ohms • Impedance: 4? for satellites and 3-4? for subwoofer • Chip: TPA3116*2 • SNR: 100 dB • Frequency response: 20-20,000 Hz • Signal input: 3.5 mm stereo jack or 3-pin socket • Signal output: 6 screw terminals • Power requirements: 12-24 VDC • Maximum current draw 3A • Quiescent current: 60 mA • Power input: 2.1 mm x 5.5 mm DC jack • Dimensions (not including potentiometer): 3.94″ W x 0.9″ H x 3.94″ D • Potentiometer shaft length: 0.6″ and master volume 0.64″ without knobs • Bluetooth: V5.0+BR+EDR.

 

Additional information

Weight .273 kg
Dimensions 10 × 18 × 15 cm
Manufacturer

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Top