sb-acoustics-satori-mr16p-4-17cm-papyrus-cone-neodymium-midrange-black-4ohm

MR16P-4

Availability: 4 in stock (backorders allowed)

Sku: MR16P-4

1 Review(s)
5.00 out of 5
Write review for this product
Quick Overview

SB ACOUSTICS SATORI MR16P-4, 17cm PAPYRUS CONE NEODYMIUM MIDRANGE BLACK 4OHM

PDF Technical Sheet

4 in stock (can be backordered)

Quantity

278.38$ CAD EACH

Categories : Midranges
Product Specifications
Manufacturer SB ACOUSTICS
Speaker Type Papyrus Cone Midrange
Nominal Diameter 17cm
Impedance 4 ohms
Power Handling (RMS) 60 W
Frequency Response 31 – 8000 Hz
Sensitivity 92 dB
Voice Coil Diameter 36mm

SB ACOUSTICS SATORI MR16P-4, 17cm PAPYRUS CONE NEODYMIUM MIDRANGE BLACK 4OHM

Features
Vented aerodynamic cast aluminium chassis for optimum strength and low compression.
Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house.
Soft low damping rubber surround for optimum transient response.
Advanced BIMAX spider for improved linearity.
Powerful optimized low distortion neodymium motor system.
Non-conducting fibre glass voice coil former for minimum damping.
Extended copper sleeve on pole piece for low inductance and reduced distortion.
CCAW voice coil for reduced moving mass.
Long life silver lead wires attached 180° apart for improved stability.
Vented pole piece and coil former for reduced compression.
High piston to chassis diameter ratio.
Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.
Mode balanced cone for reduced break-up.

Specs
Nominal Impedance 4 Ω
DC resistance, Re 3.2 Ω
Voice coil inductance, Le 0.11 mH
Effective piston area, Sd 119 cm2
Voice coil diameter 35.5 mm
Voice coil height 11.2 mm
Air gap height 5 mm
Linear coil travel (p-p) 6.2 mm
Magnetic flux density 1.17 T
Magnet weight (NEO) 0.13 kg
Net weight 1 kg
Free air resonance, Fs 31 Hz
Sensitivity (2.83 V / 1 m) 92 dB
Mechanical Q-factor, Qms 4.85
Electrical Q-factor, Qes 0.26
Total Q-factor, Qts 0.25
Moving mass incl. air, Mms 11.2 g
Force factor, Bl 5.2 Tm
Equivalent volume, VAS 47.2 liters
Compliance, Cms 2.35 mm/N
Mechanical loss, Rms 0.45 kg/s
Rated power handling* 40 W
* IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct.

 

Additional information

Weight 1.56 kg
Dimensions 12 × 19 × 19 cm
Manufacturer

Nominal Diameter

Impedance

Power Handling (RMS)

Cone Material

1 review for MR16P-4

  1. 5 out of 5

    :

    i bought these back in 2017 . i listen for about 1 h per day or longer . i had a break in period of about 6 months . i was a little worried about trying such a large mid driver but i was determined to build a large open sounding speaker . these sound great but what i found was that about a year in i tried adding a rear port to its enclosure . now it really breaths . i would recommend porting these even with its own large enclosure . this is my 4th speaker build and now these are my favourite mids . i have them paired with sb acoustics 12in woofer SB34NRXL75-8 and fountek NEOX3.0 ribbon . crossover at 380 – 1900 . i had a good experience using solen.ca

Only logged in customers who have purchased this product may leave a review.

Top