dayton-audio-pn395-8-15-neo-series-pro-woofer-with-4-voice-coil-8-ohm

PN395-8

Availability: 2 in stock (backorders allowed)

Sku: PN395-8

Be the first to review this product

Quick Overview

Dayton Audio PN395-8 15″ NEO Series Pro Woofer with 4″ Voice Coil 8 Ohm

PDF Technical Sheet

2 in stock (can be backordered)

Quantity

308.27$ CAD EACH

Categories : Pro Woofers
Product Specifications
Manufacturer DAYTON AUDIO
Speaker Type Paper Cone Pro Neodymium Woofer
Nominal Diameter 39.4cm
Impedance 8 ohms
Power Handling (RMS) 800 W
Frequency Response 40 – 3500 Hz
Sensitivity 97.3 dB
Voice Coil Diameter 10cm

Dayton Audio PN395-8 15″ NEO Series Pro Woofer with 4″ Voice Coil 8 Ohm

Dayton Audio left no boxes unchecked on the PN395-8 woofer. It features high power handling, 4″ inner and outer wound voice coil, glass fiber former, powerful FEA optimized Neodymium motor, ribbed paper cone, and a copper cap on top of the extended pole piece. Thanks to the lightweight motor assembly, the PN395-8 weighs in at only 16 lbs, 30% to 50% lighter than a comparable ferrite driver, making it “Roadie approved” and perfect for mobile DJs and portable PA systems. The PN395-8 is an ideal driver for any high output 2-way and 3-way speaker systems, bass bins, or horn loaded designs.

Lightweight but Powerful Motor Assembly

The lightweight but powerful neodymium motor assembly on the PN395-8 has been FEA optimized to provide a combination of low distortion and high efficiency. With the large neodymium magnet mounted inside the voice coil nearly all of the magnetic strength is concentrated into the magnetic gap providing up to 40% better utilization than conventional motor designs. The extended pole piece includes a large copper cap helping to lower distortion and linearize inductance.

Rugged Construction and Suspension

To stand up to the use and abuse of the professional sound environment Dayton Audio made sure the PN395-8 can take a beating. The cast aluminum frame uses 6 wide spokes to firmly support the motor assembly, and the thick mounting flange is reinforced to create an incredibly solid mounting surface. The cone, constructed of thick paper for a natural response, includes glass fiber reinforcement and uses a ribbed design offering additional structural support. Supporting the cone is a heavy spider with integrated silver tinsel leads and triple roll treated cloth surround, both designed for high excursion applications allowing the PN395-8 to handle short bursts of excessive power without damage.

High Power Handling and Low Power Compression

Along with high efficiency, you need a lot of power to achieve extreme SPL levels. Capable of handling up to 800 watts RMS and 1,600 watt peaks, the PN395-8 can take the heat. The 4″ voice coil uses a vented fiberglass former with an inside/outside winding configuration which doubles the coil’s exposed surface area for improved heat dissipation. The motor assembly includes a large pole vent along with 8 large peripheral vents in the voice coil gap to keep fresh air moving across the coil keeping temperature at a minimum. Finally, the frame has venting behind the spider with integrated heatsinks removing as much heat as possible from the sensitive motor and voice coil.

Additional information

Weight 11.4 kg
Dimensions 22 × 42 × 42 cm
Manufacturer

Nominal Diameter

Impedance

Power Handling (RMS)

Cone Material

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Top